Open virtual machine's configuration Hardware CPU & Memory; Set the required amount of RAM by entering a number manually or moving the slider: NOTE: The amount of memory assigned to a virtual machine must be multiple of 1024 or Windows may behave inappropriately. 1024, 2048, 3072 MB and so on.
Hi guys. So I'm thinking about getting the RAM upgrade for the gl752, comes with a DDR4 2133Mhz 8GB ram, more concretely a SK Hynix, and I think they don't sell to public markets. So, given the fact I can't get the exactly same ram, I've been searching for one.
In the specs web, says it holds up a DDR4 2133 MHz SDRAM, but the term SDRAM is a thing I can't understand; SDRAM's are much bigger than the one this laptop is holding. Anyway, the port is a SODIMM. Here's a pic of my laptop I took when I was about to install the SSD;
http://i63.tinypic.com/152nls1.jpg
So, the one I lay my eye on;
http://www.kingston.com/dataSheets/HX421S13IB_8.pdf
About 40-60€. Does anyone know any other brand making this new DDR4 at a better quality/price?
Thanks!
In this guide I will show you how to remove Asus ZenBook 14 UX433FN bottom cover, I will also remove the SSD, battery, heatsink, cooling fan, speaker, touchpad, keyboard, palmrest, motherboard, and screen.
Teardown is what we do! Follow us on Facebook for the latest repair news.
It can be seen that the air inlet at the bottom is not really large, and the main air inlet should be on the other side of the LCD hinges. We also noticed that there is a small gap in the front of the fuselage, which also shows that the Asus ZenBook 14 UX433FN is a thin and light laptop that can support one-handed opening and closing.
- Mine has 12 gb of ram. I cracked open the case to see what I could do for upgrades, this is what I found there is a standard laptop dubbe ram slot with 1 chip in it on the top layer, below that is the sdram chip. There was only 1 pci slot that I could see. So for your first question, Probably, just make sure you get the right one.
- If all the slots (or at least two slots) work, then use two 4GB RAM sticks. The four (4) RAM slots your motherboard has, I presume, are grouped into two according to color. That simply means that the one pair is a dual-channel memory slot, and tho other pair is a dual channel memory slot. Using four (4) 2Gb RAM sticks will give you two (2.
The bottom case is fixed by 9 visible screws, but you need to pay attention to the screws under the two foot pads.
After removing 11 screws, insert a plastic thin tool under the bottom cover and slide the tool to unlock the latches that securing the bottom cover to the palm rest.
The internal layout of the Asus UX433FN is perfect; each part is neatly placed and has a high internal space utilization.
There is a metal piece on the battery to fix and protect the battery. This design is the first time I saw it in a thin and light laptop.
Since the battery occupies nearly half of the space inside, the battery capacity reaches 50 watts, which is relatively large in an ultrabook.
Casino nova scotia halifax poker room facebook.
Disconnect the battery cable from the motherboard and remove the screws that secure the battery to remove the battery.
Under the battery, we can access the touchpad module and the keyboard cable, on the right side of the battery is M.2 SSD.
The size of the speaker is still relatively large, which can bring good sound effects.
The Asus ZenBook 14 UX433FN comes with a Western Digital 512GB NVMe M.2 SSD, which uses a multi-chip stack design, so the effective area of the board is quite small.
Remove three screws that securing the touchpad and take out the touchpad.
The surface of the touch panel has a layer of glass, which can give users a very good touch feel.
Remove three screws and disconnect the fan cable from the motherboard, then take out the cooling fan.
It can be seen that the fan is very thin, but the fan blade area is not small, so even a single CPU fan can bring considerable air volume.
The motherboard is divided into two parts by the fan, so there is a yellow cable to connect the two circuit boards.
It is worth noting that the LCD hinge is securing on the motherboard, and it is also securing the LCD cable.
Hi guys. So I'm thinking about getting the RAM upgrade for the gl752, comes with a DDR4 2133Mhz 8GB ram, more concretely a SK Hynix, and I think they don't sell to public markets. So, given the fact I can't get the exactly same ram, I've been searching for one.
In the specs web, says it holds up a DDR4 2133 MHz SDRAM, but the term SDRAM is a thing I can't understand; SDRAM's are much bigger than the one this laptop is holding. Anyway, the port is a SODIMM. Here's a pic of my laptop I took when I was about to install the SSD;
http://i63.tinypic.com/152nls1.jpg
So, the one I lay my eye on;
http://www.kingston.com/dataSheets/HX421S13IB_8.pdf
About 40-60€. Does anyone know any other brand making this new DDR4 at a better quality/price?
Thanks!
In this guide I will show you how to remove Asus ZenBook 14 UX433FN bottom cover, I will also remove the SSD, battery, heatsink, cooling fan, speaker, touchpad, keyboard, palmrest, motherboard, and screen.
Teardown is what we do! Follow us on Facebook for the latest repair news.
It can be seen that the air inlet at the bottom is not really large, and the main air inlet should be on the other side of the LCD hinges. We also noticed that there is a small gap in the front of the fuselage, which also shows that the Asus ZenBook 14 UX433FN is a thin and light laptop that can support one-handed opening and closing.
- Mine has 12 gb of ram. I cracked open the case to see what I could do for upgrades, this is what I found there is a standard laptop dubbe ram slot with 1 chip in it on the top layer, below that is the sdram chip. There was only 1 pci slot that I could see. So for your first question, Probably, just make sure you get the right one.
- If all the slots (or at least two slots) work, then use two 4GB RAM sticks. The four (4) RAM slots your motherboard has, I presume, are grouped into two according to color. That simply means that the one pair is a dual-channel memory slot, and tho other pair is a dual channel memory slot. Using four (4) 2Gb RAM sticks will give you two (2.
The bottom case is fixed by 9 visible screws, but you need to pay attention to the screws under the two foot pads.
After removing 11 screws, insert a plastic thin tool under the bottom cover and slide the tool to unlock the latches that securing the bottom cover to the palm rest.
The internal layout of the Asus UX433FN is perfect; each part is neatly placed and has a high internal space utilization.
There is a metal piece on the battery to fix and protect the battery. This design is the first time I saw it in a thin and light laptop.
Since the battery occupies nearly half of the space inside, the battery capacity reaches 50 watts, which is relatively large in an ultrabook.
Casino nova scotia halifax poker room facebook.
Disconnect the battery cable from the motherboard and remove the screws that secure the battery to remove the battery.
Under the battery, we can access the touchpad module and the keyboard cable, on the right side of the battery is M.2 SSD.
The size of the speaker is still relatively large, which can bring good sound effects.
The Asus ZenBook 14 UX433FN comes with a Western Digital 512GB NVMe M.2 SSD, which uses a multi-chip stack design, so the effective area of the board is quite small.
Remove three screws that securing the touchpad and take out the touchpad.
The surface of the touch panel has a layer of glass, which can give users a very good touch feel.
Remove three screws and disconnect the fan cable from the motherboard, then take out the cooling fan.
It can be seen that the fan is very thin, but the fan blade area is not small, so even a single CPU fan can bring considerable air volume.
The motherboard is divided into two parts by the fan, so there is a yellow cable to connect the two circuit boards.
It is worth noting that the LCD hinge is securing on the motherboard, and it is also securing the LCD cable.
Ampliar Slots Ram Upgrade
The LCD hinge on the right side not only the securing the circuit board, but also securing the heatsink module. So we need to remove the LCD hinge before we can continue the disassembly work.
